Boiler Guide

Basic Burner Setup Information Additional Information
Appliance
Model
Low Fire
Rate Baffle
Std. Air
Tube
Pump
Pressure
Recom.
Chassis
Approximate
Air Settings*
Insertion
Depth
Burner
Type
Head
Type
Static Plate/
Stop Screw
Nozzle
Type
Notes
Trianco, Inc. / Laars, Inc. (cont’d)
MAX 100 AFII 150 AFII-9 # 4 0.85 X 60°AS — HLX50HE 140 B7203 4 3-1/2”
MAX 120 AFII 150 AFII-9 # 6 1.00 X 60°AS — HLX50HE 140 B7203 4 3-3/4”
MAX 75 AFII 150 AFII-9 # 1 0.65 X 70°AS — HLX50HE 140 B7203 3 3-3/4”
DMAX 165 CF375 V1-1 — 1.35 X 45°B (H) — CF56KY 140 BCF3907 S-7 / B-0 3-3/4” 31
MAX 165 CF375 V1-1 — 1.35 X 45°B (H) — CF56KY 140 BCF3907 S-7 / B-0 3-3/4” 31
(2) “HS” on air tube combination = ceramic heat shield on combustion head.
(3) Pre/post-purge control must be used.
(27) Requires Stainless Steel air tube.
(31) The (H) in the Nozzle Description denotes a Hago.
(40) Must maintain 0° downward pitch on air tube/flange.
Triangle Tube
HM 80 AFG F6 2-3/4” 1.35 X 80°B — AF65YB 100 B2007 S-8 / B-0 3-1/2” 19
HMBURZ8 AFG L1 3-3/8” 0.50 X 60°B — AFG50MB 200 B2007 — 2-3/4”
DLT F-25 AFG L1 3-3/8” 0.50 X 60°B — AFG50MB 200 B2007 S-5 / B-0 2-3/4” 19
DLT F-30 AFII 100 AF2-6 # 4 0.65 X 45°AS — HLX70HD 175 — 6 3-1/8” 15
DLT F-35 AFII 100 AF2-6 # 5 0.75 X 45°AS — HLX70HD 175 — 6 3-1/8” 15
DLT F-40 AFII 150 AF2-9 # 4 1.10 X 60°B — HLX50HC 125 B7203 5 —
DLT F-45 AFII 150 AF2-9 # 8 1.35 X 45°B — HLX50HC 125 B7203 6 —
HM 40 AFII 150 AF2-9 # 4 1.10 X 60°B — HLX50HC 125 B7203 5 2” 45
HM 45 AFII 150 AF2-9 # 8 1.35 X 45°B — HLX50HC 125 B7203 6 2” 45
HM 100 CF375 SL1-2 — 2.25 X 45°P (H) — CF56KZ 100 — S-10 / B-5 2” 31, 40
HM 90 CF375 SL1-0 — 1.75 X 45°B (H) — CF56KZ 100 — S-10 / B-5 2” 31, 40
F-25 CV NX 6-slot — 0.50 X 60°B (H) 32229 NX70LC 175 B8001 2 2” 15, 31
F-25 DV NX 6-slot — 0.50 X 60°B (H) 32229 NX70LC 175 B8001 2 2” 3 , 15,31
F-30 CV NX 6-slot — 0.65 X 60°B (H) 32229 NX70LC 175 B8001 2.5 2” 15, 31
F-30 DV NX 6-slot — 0.65 X 60°B (H) 32229 NX70LC 175 B8001 2.5 2” 3 , 15,31
F-35 CV NX 9-slot — 0.75 X 60°B (H) — NX70LB 175 B8001 3.25 2” 15, 31
F-35 DV NX 9-slot — 0.75 X 60°B (H) — NX70LB 175 B8001 3.25 2” 3 , 15,31
HM 100 SMG SV1-2 — 2.25 X 45°P — SMG82NR 150 B1406 S-5 / B-0 3-3/4”
HM 60 SMG SV1-.5 — 1.65 X 60°B — SMG82NR 150 B1406 S-2 / B-0 2”
HM 90 SMG SV1-.5 — 1.75 X 45°ES — SMG82NR 150 B1406 S-2 / B-0 3-3/4”
(3) Pre/post-purge control must be used.
(15) Must maintain 6° downward pitch on air tube/flange.
(19) Requires gasket #31802.
(31) The (H) in the Nozzle Description denotes a Hago.
(40) Must maintain 0° downward pitch on air tube/flange.
(45) Must maintain 4° downward pitch on air tube/flange.
Ultimate Eng.
K3T 0.50-0.75 AF F0 2-3/4” 0.50-0.75 X 70°A — AF44XZT 100 B3001 — —
K3T 0.75-1.00 AF F3 2-3/4” 0.75-1.00 X 70°A — AF44XN 100 B3001 — —
K4 0.65-0.75 AF F0 2-3/4” 0.65-0.75 X 80°A — AF44XZT 100 B3001 — —
K4 0.75-1.00 AF F3 2-3/4” 0.75-1.00 X 80°A — AF44XN 100 B3001 — —
K4 1.00-1.10 AF F6 2-3/4” 1.00-1.10 X 80°A — AF44YB 100 B3001 — —
K4T 0.50-0.75 AF F0 2-3/4” 0.50-0.75 X 80°A — AF44XZT 100 B3001 — —
K4T 0.75-1.00 AF F3 2-3/4” 0.75-1.00 X 80°A — AF44XN 100 B3001 — —
K4T 1.00-1.10 AF F6 2-3/4” 1.00-1.10 X 80°A — AF44YB 100 B3001 — —
K5 0.60-0.75 AF F0 2-3/4” 0.60-0.75 X 80°A — AF44XZT 100 B3001 — —
K5 0.75-1.00 AF F3 2-3/4” 0.75-1.00 X 80°A — AF44XN 100 B3001 — —
K5 1.00-1.20 AF F6 2-3/4” 1.00-1.20 X 80°A — AF44YB 100 B3001 — —
K5 1.20-1.30 AF F12 2-3/4” 1.20-1.30 X 80°A — AF44XO 100 B3001 — —
K5T 0.50-0.75 AF F0 2-3/4” 0.50-0.75 X 80°A — AF44XZT 100 B3001 — —
90