Operating instructions

18
Operating Instructions
Explanations
Outputs
Connect the drive to the outputs of the device. The arrows on the device indicate
the running direction of the drive.
Light/drive
A bridge connection between L and the encoding terminal light/drive allows the
running time to be increased from 120 seconds to infi nity.
Venetian blind/roller shutter
A bridge connection between L and the encoding terminal venetian blind/roller
shutter allows the receiver to be controlled in nonmaintained command mode.
Press and hold the control command button for more than 1 second to move the
blind in maintainedcommand mode.
Individual inputs
If you press one of the up or down buttons of the maintained switch for more
than 0,5 seconds, the blind/shutter will move automatically in the chosen direc-
tion to the fi nal position. If you touch it for less than 0,5 seconds, the blind/shut-
ter will move and stop again immediately.