Installation guide

Subject to errors and technical changes 33 Copyright by Harman/Becker GmbH, D-76303 Karlsbad
Installation instructions for the TriVision Car Docking Station
4. Installation instructions
Damage due to polarity reversal or short-circuit
Incorrect cable connections and short-circuits can seriously damage the unit.
Disconnect the vehicle battery for the duration of unit installation.
In order to avoid short-circuits and malfunctions, install the cables so that they cannot be pinched, kinked, chafed
or detached. Especially take this into account during installation of a unit if the vehicle is equipped with a tilting
sunroof or roof window.
Before installation, park the vehicle in a safe and level place and remove the ignition key.
Apply the parking brake.
In order to avoid malfunctions, it is absolutely essential to observe the relevant cable cross-section when using
branch connections/cable connectors.
In order to avoid short-circuits and any associated risk of fire, cables which have to be cut must be properly
insulated.