Installation guide

Subject to errors and technical changes 55 Copyright by Harman/Becker GmbH, D-76303 Karlsbad
Installation instructions for the TriVision Car Docking Station
• Engage the Car Docking Station into the locking tabs on the base
plate.
Fasten the Car Docking Station to the base plate using the 4 M4
screws provided.
Take special care not to pinch or damage any wiring in the process.
• Reconnect the vehicle battery.
• Insert the TriVision into the Car Docking Station as described in the Operation Guide.
• The TriVision is now ready for operation.