Installation guide

Subject to errors and technical changes 53 Copyright by Harman/Becker GmbH, D-76303 Karlsbad
Installation instructions for the TriVision Car Docking Station
11. Connecting the power supply
• Connect the power supply cable (M).
Connect the brown wire to terminal 31 (earth)
Connect the black wire to terminal 15 (switched voltage)
Connect the red wire to terminal 30 (permanent positive)
The yellow wire does not need to be connected.
In order to avoid short-circuits and malfunctions, install the cables so that they cannot be pinched, kinked, chafed
or detached.
G Warning
Removing the fuses represents a fire hazard
The fuses integrated in the wiring harness must be used. Without fuses, there is a risk of fire or damage to the
components.
In order to avoid malfunctions, it is absolutely essential to observe the relevant cable cross-section when using
branch connections/cable connectors.