Installation guide

Subject to errors and technical changes 50 Copyright by Harman/Becker GmbH, D-76303 Karlsbad
Installation instructions for the TriVision Car Docking Station
10.1 Connecting adapter box for audio/video in
• Attach the adapter box (E) (two screws) and open the adapter box.
• Loosen the cable clip screw.
• Connect the audio/video in cable to the white socket. The connector
can only be attached in one direction.
• Push the housing grommet of the audio/video in cable into the re-
cess on the adapter box housing.
• Fasten the cable with the cable clip.
In order to achieve a correct earth connection, ensure that the cable
screening is clamped with the cable in the cable clip.
• Close the adapter box and fasten it again via the screws.