Installation guide

Subject to errors and technical changes 41 Copyright by Harman/Becker GmbH, D-76303 Karlsbad
Installation instructions for the TriVision Car Docking Station
9. Installation instructions for the mounting plate
9.1 Determining the ideal installation location
• First determine the ideal installation position of the Car Docking Station. Refer to the information given under “Gen-
eral information on installation of the Car Docking Station” on page 38 for this purpose.
9.2 Locating support struts of the roof structure
• Consult a specialist dealer to find out where the roof struts are located in your vehicle. Also find out whether any
wiring is routed between the roof and the headliner, as this could be damaged during installation of the Car Docking
Station.
G Warning
Incorrect installation
Incorrect installation may result in damage to the unit or to the vehicle. Specialist knowledge and skills are required
to install the unit and its components. We strongly recommend that you have the unit installed by a specialist
workshop. Here, checks can be made to establish whether there are any reasons to prevent installation (roof antenna,
sliding roof, possible installation position etc.).
G Warning
In order to prevent head injuries and driver distraction during driving, the Car Docking Station must be installed
such that the possibility of contact between the driver's head and the TriVision, as well as viewing of the TriVision
are prevented even when the driver seat is in the rearmost position.