User manual

102
>>> NAVIGATION MODE
Blocking route sections/roads
You can block individual route sections/
roads. The Navigation device then calcu-
lates a sensible diversion to avoid the
blocked section.
> Use the and buttons in the
route directions to select the section of
the route to be blocked.
> Press the
Block button.
> Select
Block for current route to block
the section of the route for the current
route guidance session only.
> Select
Block permanently to block the
section of the route for future route
guidance sessions too.
Changing of the blocking times is descri-
bed on page 131.
Selecting alternative routes
You can have the different routes
displayed by the navigation device.
> When the whole route is displayed,
press the Alternative routes button.
(This function can be selected in the
Route overview, too.)
After a short time, the map is displayed.
Each route is calculated after each other
and displayed on the map. On the right-
hand side, you can see the coloured list
of the singe routes, according to the
kilometres to be travelled and the
expected duration of the travel.
You can select the desired route by
pressing the buttons on the right.
Note:
If the route section is more than 10 kilo-
metres long, you can choose, in another
menu, whether to block the entire sec-
tion or just part of it.