Operation Manual
82
*HQHUDORSHUDWLRQ
)DGHU
Press the button and then the multifunction button .
Use the right rotary control for the desired fader setting.
6HWWLQJWKHEDODQFH
Press the button and then the multifunction button .
Set the desired balance level using the right rotary control .
/LQHDUVHWWLQJ
Briefly press the button.
Press the multifunction button -
!65, -3(; is dis-
played. By pressing the multifunction button again the
tone settings for the currently selected signal source (e.g. FM)
are set to an average value.
6ZLWFKLQJORXGQHVVRQRII
Press the button and then the multifunction button .
Using the multifunction button you can select either
loudness on (
) or loudness off ().
Loudness is switched off in MW, LW and SW wavebands.
6HWWLQJWKHVXEZRRIHURUFHQWUHVSHDNHUYROXPH
Press the multifunction button .
Use the right rotary control to set the desired subwoofer
volume level.
(+
!"/ V
(:!9) (+ (3 3; <) +5
(3
)+ " V
(:!9) (+ (3 3; <) +5
,+"#)1?
(:!9) (+ (3 3; <) +5
3;
3;
+5
,2!+"00
(:!9) (+ (3 3; <) +5
+5
<)
24,,#"/V
(:!9) (+ (3 3; <) +5