Operation Manual

66
>>> NAVIGATION MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
In the 3D display, you can set the angle of
inclination of the map display. This set-
ting can only be changed if the Autozoom
function ( ) is turned on.
> Use the arrow buttons to set the de-
sired maximum angle of inclination.
> Press the button to save the set-
ting.
> Use the arrow buttons to set the de-
sired minimum angle of inclination.
> Press the button to save the set-
ting.
Changing the orientation of the map
(2D)
You can select whether the map should al-
ways be orientated to the direction of trav-
el, or to the North.
> Open the options menu for the map
display.
> Press the
Map button.
> Press the
North up or Heading up but-
ton.
The display of the map will change ac-
cordingly.
Displaying current position
You can display your current position and
store this position. You can also display
information concerning the current GPS
reception and the current country.
> Open the options menu for the map
display.
> Press the
Map button.
> Press the
Position info button.
The current position is displayed. If possi-
ble, an address is displayed. If no address
is available for the current position, the
geographic coordinates are displayed.
You can return to the map using the
On
map
button.
By pressing
Save you can store your cur-
rent position in the fast access list.
1
1
1
1
1
1
Note:
This function is only available in 2D
mode.