Operation Manual

65
NAVIGATION MODE >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Selecting 2D/3D mode
You can switch the map display between
3D and 2D display.
> Open the options menu for the map
display.
> Press the
Map button.
> Press the
3D button for 3D display or
the
2D button for 2D display.
The map changes to the selected display
(2D view or 3D view) ).
Changing zoom steps and map angle
You can choose which zoom steps the
map should be changed to when the next
manoeuvre is approaching. You can also
set the map angle in 3D mode.
> Open the options menu for the map
display.
> Press the Map button.
> Press the
Map view button.
Depending on the current display (3D
view or 2D view ) the settings op-
tions are different.
If you have changed the settings, press
OK
to save them.
To reset the options to the basic setting,
press the
Default range button.
To leave the settings menu without mak-
ing any changes, press the button.
Setting options
You can select the areas where the dis-
played map should be zoomed. This set-
ting can only be changed if the Autozoom
function ( ) is turned on.
> Press the button to select the small-
est desired zoom step.
> Press the button to save the set-
ting.
> Press the button to select the largest
desired zoom step.
> Press the button to save the set-
ting.
1 2
1
2
1
2
1 2