Operation Manual

52
> US
NAVIGATIONAL MODE >>>
> Confirm your selection by pressing the
OK key.
The Time Zone key
Set the relevant time zone for your region
in the Time Zone configuration window.
This is an important setting for calculat-
ing the estimated arrival times.
The Route planning key
Use the Route planning configuration
window to specify whether or not you
want the system to calculate the next point
along your journey automatically as soon
as you have completed one stage.
• If you have activated automatic route
calculation, the next point along your
journey is automatically determined as
soon as one stage is completed.
• If you have deactivated automatic route
calculation, you can navigate to the next
point by briefly selecting any point on
the map and then choosing the
Next
destination
option.
2D autozoom Decide whether you wish
to work with Zoom in,
Standard, Zoom out or
No autozoom as your de-
fault setting while navi-
gating in the 2D display.
With the Autozoom op-
tion, the zoom range var-
ies according to your
speed: When you drive
slowly, the scale is de-
creased. When you drive
faster, the scale is in-
creased.
2D display Decide whether you
want the map to
face North oriented or
In driving direction as
the default setting while
you are navigating in the
2D display.
Setting Meaning
Time zone Specify the relevant time
zone for your region.
DST (Daylight
Saving Time)
Specify whether daylight
saving time applies to the
current time zone.
6039
6050