Operation Manual

50
> US
NAVIGATIONAL MODE >>>
> Select the fields Interstates, Ferries
and Tollways one-by-one and choose
one of the following options for each:
> Confirm your selection by pressing the
OK key.
The Volume key
Use the Volume configuration window to
set the volume of all voice prompts every
time the Traffic Assist Highspeed is start-
ed. Depending on the situation, you can
also adjust the volume in the map display.
> Select the
Volume field and choose an-
other value.
> Confirm your settings by hitting the
OK
key.
The Speed key
Use the Speed configuration window to
choose whether or not you wish to have
speed limits displayed during navigation.
You can also choose whether or not to re-
ceive an acoustic warning if you exceed
the speed limit.
The following settings are possible.
Setting Meaning
Allowed With this option, the
corresponding road type
is included in the route
calculation.
Avoid With this option, wher-
ever possible, the corre-
sponding road type is
avoided.
Not permitted With this option, the
corresponding road type
is not included in the
route calculation.
6
05
9
6
061
6
06
0
WARNING
The volume of the navigation unit
should be set so that noises outside the
vehicle can be heard.
6039
Setting Meaning
Show signs The Show signs button
allows you to show traffic
signs if you exceed the
speed limit.
In town The In town button indi-
cates the speed limit
above which you will re-
ceive an acoustic warning
when driving in built-up
areas.
6017