Operation Manual

17
>>> GENERAL OPERATIONS
> US
Battery quality declaration
The capacity of the rechargeable battery in
your mobile navigation system decreases
with every charging/discharging cycle.
Improper storage at excessively high or
low temperatures may also cause a gradual
deterioration of capacity. Consequently,
the operating time may be substantially
reduced even in the case of a fully-charged
battery.
The rechargeable battery is designed such
that it should certainly still be possible for
it to be charged and discharged after 6
months of operation of your mobile navi-
gation system. In the event of a significant
loss of capacity, we recommend replace-
ment of the rechargeable battery. Please
contact your authorized dealer. Use only
genuine BECKER original spare parts.
Display quality declaration
In some cases, for technical reasons, a few
discolored dots (pixels) may be visible on
the display. Some pixels may also appear
brighter or darker. However, such in-
stances do not represent a product flaw.
Start-up
Once the Traffic Assist Highspeed has
been unpacked and checked for damage,
the unit can be started up. The individual
start-up stages are:
• connect to memory card
• connect to power supply
• Switching on the unit
• Ensuring antenna reception (if naviga-
tion is desired)
Memory card
The map data is preinstalled on the card
supplied with the unit. If you intend to
listen to music or view images using the
Traffic Assist Highspeed, you can save
these to the free space on the memory
card. If you require more memory space,
you must save further images or music
tracks to a separate card (not included).
The separate card must be formatted with
the FAT 16 file system.
Note:
When the unit is switched on for the first
time, internal configuration takes place.
This takes several minutes. Do not switch
the unit off during this configuration.
Note:
Playing back music during an active
navigation is only possible if the music is
stored together with the navigation data
on the memory card being used.