Operation Manual

27
*HQHUDORSHUDWLRQV
7UDQVIHUULQJXVLQJWKH86%
SRUW
The USB port is used to link the Traffic
Assist directly to a personal computer.
For transfers, the Microsoft
®
Active Sync program must be installed
on the computer. This is available free-
of-charge from the manufacturer.
The link then involves several steps:
X switch off Traffic Assist.
X link the Traffic Assist and computer
using the USB cable.
X switch the Traffic Assist back on.
ActiveSync automatically sets up a link
to the Traffic Assist.
7UDQVIHUULQJPDSV
The installation software from the DVD
should be used for the transfer. This in-
volves the following stages:
X switch off Traffic Assist.
X remove memory card and plug into an
SD card reading device or the use the
USB cable to connect the Traffic As-
sist to the computer.
X boot up the computer and insert the
DVD.
X use the installation program to transfer
the map required.
X slide the memory card back into the
Traffic Assist or correctly remove the
USB cable.
X switch the Traffic Assist back on. The
new map is available right away
7UDQVIHUULQJSLHFHVRIPXVLF
DQGSLFWXUHV
Since the map data takes up virtually all
the 1GB memory capacity of the memo-
ry card supplied, pictures and music
should be saved on to another SD card.
The files can be transferred via a card
reader or the USB connection.
5017
1RWH
Use obvious folder names because
these will help you later when you are
trying to find the file you want in the
Traffic Assist.