Operation Manual

16
*HQHUDORSHUDWLRQV
6WDUWXS
Once the Traffic Assist has been un-
packed and checked for damage, the unit
can be started up. The individual start-up
stages are:
• insert memory card
• connect to power supply
• unfold antenna
(if navigation required)
• switch on unit
0HPRU\FDUG
Map data will have already been pre-in-
stalled on the memory card supplied (the
memory card is virtually full). Another
SD memory card should be used to save
pictures and MP3 files. This is not how-
ever included in the scope of supply.
There is a card slot on the left-hand side
of the unit. The card compartment is
equipped with a spring-actuated lock
and ejection mechanism.
1RWH
When the unit is switched on for the
first time, internal configuration takes
place. This takes several minutes. Do
not switch the unit off during this con-
figuration.
1RWHV
There is a small tab on the left-hand
side of the card. If this is slid in the di-
rection indicated by the arrow, the
memory card is protected and cannot be
overwritten.
5013
1RWHV
The memory card should only ever be
inserted and ejected when the unit is
switched off. If the unit is not switched
off, data may be lost.
Navigational operations are not possible
if the memory card containing card
data is not inserted. If you remove this
during navigation, directions to your
destination will be aborted immediately.
4004
5011