User manual

95
NAVIGATION MODE >>>
The red line in the middle of the screen
represents your route. If this line ends
with two points, then the list continues
and you can scroll through the complete
list by moving your finger.
At cross-border destinations, the border
crossing is displayed with the appropri-
ate national flag. If you select the petrol
station button, a petrol station is dis-
played before and after the border if
available.
SituationScan
If this function is activated in the
Navigation settings in the Route
guidance menu, three assistants support
the driver during the travel with useful
information and help in case of
unexpected traffic situations.
The detour assistant
This function reacts to the reduction of
the speed. If there are no POIs such as
resting places or filling stations in the
vicinity, the assistant assumes that the
driver is in a traffic jam. If the symbol
is displayed in colour and begins to blink,
the assistant suggests a detour.
> Press the symbol.
A message is displayed with the
question "You are probably standing in a
traffic jam. Would you like to avoid the
jam using a detour?". Now you can have
the suggested detours displayed and
select or reject them.
If the vehicle is not on a motorway, the
detour assistant calculates possible
alternative routes before the next
crossing in case of strong stop-and-go
traffic to get you there faster. If the
assistant can calculate an alternative
route before the vehicle passes the
crossing, the symbol is blinking. The
alternative routes can be displayed and
selected similar to the identically named
function described on page 84.
The Park Assistant
This assistant will be activated when you
are near the destination or passed by the
destination. In the case when the driver is
looking for a parking place, the
symbol is activated as soon as it is
possible to park in the given point of
interest. Up to eight parking possibilities
may be displayed, where the route to
there and the footpath from the parking
Note:
If there is a traffic jam announcement
on the route, the TMC symbol
appears on the button. If there are
no traffic jams reported on the route,
the POI symbol is displayed
instead.