User manual

78
>>> NAVIGATION MODE
Setting Driver alerts
If this information is saved in the map
material and is supported by your
navigation device, you can display
information signs, e.g. for dangerous
bends or descending gradients. In
addition, you can define whether the
display of the sign is also to be
accompanied by a warning sound.
> In the
Warnings settings window,
press the
Driver alerts button.
The
Driver alerts settings window
appears.
The available driver alerts are divided into
4 categories. The four categories can be
enabled or disabled individually.
The warning sound can be set individual-
ly for each of the four categories by
pressing the symbol with the bell (
warning sound switched on).
The following signs are available in the
individual categories:
•
Curve warnings
This category includes warning signs
that relate to sharp curves.
•
Traffic regulations
This category includes other traffic
regulations, such as no passing zones.
•
General warnings
This category includes all other
warning signs, such as steep
gradients, falling rocks.
•
Informatory road signs
This category contains the available
information signs.
> Confirm your settings by pressing the
button.
Setting environmental zones (depending on
model)
You can let yourself be warned about en-
vironmental zones provided that this in-
formation is saved in the card material
and is supported by your navigation sys-
tem. This function can be activated or
deactivated . By pressing the symbol
with the bell, you can set the audible
warning signal ( audible warning
signal activated).
> Confirm your settings by pressing the
button.
Truck warnings (depending on model)
You can let yourself be warned about en-
vironmental zones provided that this in-
formation is saved in the card material
and is supported by your navigation sys-
tem. The function can be adjusted sepa-
rately for journeys with and without ac-
tive navigation. The function can be
activated or deactivated respec-