User manual

104
>>> SUPPLEMENTARY FUNCTIONS FOR TRUCKS AND MOBILE HOMES (SELECTED MODELS ONLY)
Supplementary functions for trucks and mobile homes (selected models only)
Depending on the selected settings (see
page 71 onwards), a number of helpful
supplementary functions are made
available to you.
Feedback after route calculation
When calculating the route, the best pos-
sible route is selected by taking the vehi-
cle or loading specifications into consid-
eration if possible. The route might vary
considerably from the car route as re-
gards distance, journey time or routing.
If a destination cannot be reached with-
out taking the predefined restrictions
into consideration, this will be displayed
after the route calculation.
You can scroll through the list using the
arrow key or scroll wheel on
the right-hand side of the screen.
Press the
Cancel button or to re-
turn to the last entry.
Press the
Next button to start the naviga-
tion.
The following is displayed for each re-
striction:
A graphic for the restriction
The distance from the current posi-
tion
When you select a restriction, the corre-
sponding section will be displayed on the
map.
Zooming in on the map
You can gradually zoom in and out of the
map using the Zoom buttons.
> Press Zoom in to "zoom into the
map" and thus zoom in closer to the
displayed details.
> Press Zoom out to "zoom out from
the map" and thus get a greater over-
view.
> Press the button to display the en-
tire section of the route.
Warnings with planned route
When the driver warnings function is ac-
tivated in the navigation settings, you will
be warned about road sections where
there are relevant restrictions.
If there are road sections on your route
that are subject to a restriction, your nav-
igation system will warn you shortly be-
fore reaching the road sections affected.
The layout of the message is similar as
1
2
1
2