User manual

101
NAVIGATION MODE >>>
If route guidance is active, you can select
a road length between 200 m and 50 km.
As soon as you selected the stretch, a
new route will be calculated.
Furthermore, the distance and time
difference are also displayed in the lower
part of the display.
Setting day/night display
You can switch the Navigation device
display from day to night and vice versa.
> Call up the options menu for the map
display.
> Press the
Day/Night button.
The display changes from day to night
and vice versa.
Displaying current position
(Where am I?)
You can display your current position,
make an emergency call (depending on
model), select a hospital or filling station
and save this position. Furthermore, you
can display information regarding the
current GPS reception and the current
country.
> Call up the options menu for the map
display.
> Press the
Where Am button.
The current position is displayed. If
possible, an address is displayed. If no
address is available for the current
position, the geographic coordinates are
displayed.
With the
Emergency call button you can
make an emergency call under the Eu-
rope-wide standard emergency call
Notes:
• If route guidance is not active, you can
only select between 200 and 500 m
(250 and 500 yards). You can then
define directly the days and times
when the route should be blocked.
• After the temporary blocking of a
section, the Clear blockings option
appears in the option menu of the
map view. Press this button to delete
all temporary blockings. If a route
guidance is active, the former route is
restored.