User manual

100
>>> NAVIGATION MODE
Entering/deleting a stopover
(Only available when route guidance is
active.)
With this function, you can enter a
stopover, or you can delete an entered
stopover.
> Call up the options menu for the map
display.
> Press the
Add stopover button.
You can now enter a stopover as
described under "The New destination
menu" on page 43 (
Enter address, Select
Point of Interest
, Personal destinations,
Contacts, Select on map or Enter geo-
coordinates
). You also have the option of
quickly selecting a destination using the
Select from last destinations button.
If you have entered the desired stopover,
the route is recalculated.
The stopover is indicated on the map by
a red flag.
Deleting a stopover
> Call up the options menu for the map
display.
> Press the
Delete stopover button.
> Press the
Yes button.
The stopover is deleted.
Blocking route temporarily
Using the Block road ahead option, you
can block a stretch of road ahead
temporarily. This determines a certain
stretch of road that should not be used.
The Navigation device will now try to
calculate a detour.
> Call up the options menu for the map
display.
> Press the
Block the road ahead
button.
> Select the length of block you want by
pressing the arrow buttons.
Notes:
• The selected length of the block is
only an approximation since the
actual distance blocked depends on
the availability of an exit.