Operating instructions

11
clack
c) Anti-lifting device at the lower nal position to upper buffer
Move both switches to the program-
ming position.
Travel downwards until the lower nal
position.
The tubular drive switches off auto-
matically.
Subsequently travel upwards against
the permanent upper buffer.
The tubular drive switches off auto-
matically.
The nal positions have now been set.
d) Anti-lifting device at the lower nal position to upper position without
buffer
Move both switches to the program-
ming position.
Travel downwards until the lower nal
position.
The tubular drive switches off auto-
matically.
Subsequently travel to the desired up-
per nal position.
Now press the programming button of
the installation set for 3 seconds.
The tubular drive makes a “clack”
sound to conrm.
The nal positions have now been set.
Action Response