Operating instructions

11
7a)
7b)
8a)
8b)
8c)
7) Deleting end limits
Note
The end limit settings can only be deleted via the master trans-
mitter.
7a) Deleting the end limits individually
Adjust the shutter into the end limit po-
sition to be deleted.
First press and hold the learn button.
Within 3 seconds also press the STOP
button and keep both buttons pressed
for 10 seconds.
The tubular drive makes a “clack-clack”
sound to conrm.
The end limit has been deleted.
7b) Deleting both end limits
First press and hold the learn button.
Within 3 seconds also press the STOP
button and keep both buttons pressed
for 10 seconds.
The tubular drive makes a “clack-clack”
sound to conrm.
Both end limits have been deleted.
8) Intermediate position
Note
The intermediate position can be set at any given position and
lies between the upper and lower end limits. The intermediate
position can only be set after the two end limits have been set.
Adjust the shutter curtain into the de-
sired intermediate position.
8b) Moving the shutter into the intermediate position
Note
The shutter moves into the intermediate position from the upper
end limit.
8c) Deleting the intermediate position
Adjust the shutter into the intermediate
position.
First press and hold the STOP button.
Within 3 seconds also hold the DOWN
button and keep both buttons pressed.
First press and hold the STOP button.
Within 3 seconds also hold the DOWN
button and keep both buttons pressed.
Action Response
Adjust the shutter curtain into any posi-
tion between the two end limits.
The tubular drive makes a “clack”
sound to conrm.
The intermediate position has been
stored.
Press the DOWN button twice within
one second.
The shutter curtain moves into the in-
termediate position.
The tubular drive makes a “clack-clack”
sound to conrm.
The intermediate position has been de-
leted.
8a) Setting the intermediate position
Clack
Clack
Clack
Clack
Clack
Clack
Clack