Operating instructions

Assembling the drive adapter with drive adapter safety catch
Put the drive adapter (1) onto the drive shaft of the tubular drive. You can see where
to insert the safety catch (2) from its shape. When inserting the drive adapter safety
catch (2) into the hole (4), make sure that the locking lug (3) engages. You will hear a
click. Check that the safety catch is securely in position by pulling on the drive adapt‐
er (1).
Assembling the drive adapter with screw connection
Put the drive adapter (1) onto the drive shaft of the tubular drive. For the assembly,
use an M6 x 12 screw (3) with appropriate washer (2) and suitable screw retainer.
Threaded hole (4)
Securing the drive against axial displacement
-10 mm
In order to secure the drive against axial displacement, we recommend screwing the
drive adapter to the tube.
Attention
When drilling into the barrel, never drill near the tubular drive!
Fixing the drive adapter to the barrel dia. 45 and dia. 58
Size of drive
[mm]
Diameter of barrel
[mm]
Torque
max. [Nm]
Fastening screws
for drive adapter (4 pc.)
dia. 45 60 - 70 mm
plastic or
diecast drive adapter
40 self-tapping screw
dia. 4.8 x 9.5 mm
dia. 58 63 - 120 mm
diecast drive adapter
120 self-tapping screw
dia. 6.3 x 13 mm
dia. 58 85 - 133 mm
aluminium drive adapter
120 countersunk screw
M8 x 16 mm
We also recommend screwing the idler to the barrel.
7