Operating instructions

Intended use
The type of tubular drive described in these instructions is intended solely for the operation of roller shutters, roller doors and sun
protection systems. The crank handle is intended to be used for convenient manual operation only in the event of a power fail‐
ure. Continuous operation or use of tools (e.g. drilling machines for activation of the crank handle) is prohibited as, after a certain
amount of time, this leads to loss of manual function and with it the tubular drive.
The tubular drive must not be used in potentially explosive areas.
The mains connecting cable is not suitable for transporting the drive. Always carry the drive by the housing tube.
Other applications, uses and modifications are not permitted in order to protect the safety of the users and others, since these
actions can impair the system’s safety and carry the risk of personal injury and property damage. The drive manufacturer does not
accept liability for damages or injury arising from such actions.
Always observe the information in these instructions when operating or repairing the system. The drive manufacturer does not ac‐
cept liability for damages or injury resulting from improper usage.
Installation
Assembling the drive
Attention
To connect the drive to the driven part, solely mechanical accessory components made by the drive manufac‐
turer from the current product catalogue may be used.
Prior to mounting, the fitter must ensure that the masonry and the system being motorised are sufficiently robust (drive torque plus
weight of the shading solution).
Caution
Electrical connections may only be carried out by a qualified electrician. Prior to assembly, the power supply
must be disconnected and secured. Please give the enclosed connection information to the responsible elec‐
trical contractor.
Calculate the space required at the side (M) by measuring the drive head and wall
bracket. The clear dimension of the box (X) minus the space required at the side (M)
and idler (G) gives the length (L) of the barrel: L=X-M-G.
The space required at the side (M) varies depending on the combination of drive and
wall bracket.
Attention
The fastening elements (wall bracket) must be aligned and fixed so that tensions cannot occur when screwing
the crank handle housing.
Then mount the wall bracket and idler. Ensure that the barrel is aligned at right angles to the wall and that sufficient axial play is
allowed for the mounted system.
Attention
When using anti-lifting devices, closed brackets must be fitted. The tubular drive presses the closed curtain
down to make it difficult for people to reach under it or raise it. Only use curtains made of sufficiently strong
material, such as aluminium, steel or wood. To prevent damage to the curtain it must run in guide tracks from
top to bottom.
Assembly and Operating Instructions
6