Operating instructions

Contents
General
These tubular drives are high-quality products with the following features:
▪ For use with roller shutters
▪ For use with sunblinds
▪ For use with doors
▪ Convenient manual control in the event of power failure
▪ Easy limit switch setting on the drive
▪ Compatible with all of the drive manufacturer's control units for roller shutters and sunblinds.
Please observe these Assembly and Operating Instructions when installing and setting the equipment.
Explanation of nomenclature
Tubular drives:
Example: R12/17C PROF+
R 12 / 17 C PROF+
Type Nm
min
-1
C-Plug =
plug-in connecting cable
Limit switch version
Types:
P = pico tube dia. 35 mm
R = regular tube dia. 45 mm
L = large tube dia. 58 mm
Limit switching versions:
M = mechanical limit switch
HK = mechanical limit switch with crank handle
G = DC drives with mechanical limit switch
GHK = DC drives with mechanical limit switch and crank handle
Electronic limit switching:
R= roller shutters
S = sun protection
F = with integrated radio receiver
P = with point-to-point switching
E = reversing in the limit position
O = with sensitive obstacle detection
SMI = Standard Motor Interface
+ (with R) = with automatic detection of anti-lifting devices
+ (with S) = higher closing force for cassette awnings
Software versions
A0…z9
Explanation of pictograms
Caution
Denotes a potentially hazardous situation. If this is not avoided, injuries may result.
Attention
Denotes a potentially hazardous situation. If this is not avoided, the product or some‐
thing in its vicinity may be damaged.
Note
Denotes user tips and other useful information.
3