Installation manual

59
Controls for sun protection
0 = Off
1 = Sensitive
9 = Insensitive
3. Setting the wind threshold
Use the tool provided to turn the wind
threshold regulator at the SWC241 to the
desired setting.
The wind threshold has 11 possible
settings (approx. 2 m/s to 22 m/s).
When slowly turning the regulator,
the tubular drive clicks to indicate the
setting changes.
4. Setting the release angle
Use the tool provided to set the release
angle on the rotary switch of the PCB.
5. Programming the release
angle
Move the awning to the extending limit
position. After waiting for 15 seconds,
press the programming knob until, after
6 seconds, the LED changes from green
to orange and back to green.