Installation manual

56
1. Programming the master
transmitter
Switch off the power supply on the radio
receiver (drive type PSF(+)) and then
switch it back on . Press the program-
ming button on the master transmitter
until the drive clicks twice .
Note: Follow the instructions on
pages 52 and 53 to set the limit posi-
tions for the PSF(+) drive.
Commissioning the radio-controlled Sun-Wind-Set with
handheld transmitter and SWS441/SWS641 sensor
SWS441/SWS641 control set
2. Programming the
SC811/SC861
a) Press the programming button of the
master transmitter until the tubular
drive clicks once .
b) Press the programming button of
the SC811/SC861
until the tubular
drive clicks once .
c) Press the programming button of
the SC811/SC861
again until the
tubular drive clicks twice .
1 x click
1 x click
2 x click
2 x click