Installation manual

55
Controls for sun protection
2. Setting the sun threshold
Use the tool provided to turn the sun
threshold regulator to the desired
setting.
The sun threshold has 15 possible set-
tings (approx. 2 klux to 100 klux). When
slowly turning the regulator, the curtain
shifts to indicate the setting changes.
Commissioning the radio-controlled Sun-Wind-Set with
handheld transmitter and SWS241 sensor
3. Setting the wind threshold
Use the tool provided to turn the wind
threshold regulator to the desired
setting.
The wind threshold has 11 possible set-
tings (approx. 2 m/s to 22 m/s). When
slowly turning the regulator, the curtain
shifts to indicate the setting changes.
4. Checking settings
After the thresholds are set, the system
switches to the TEST mode automatical-
ly. In the TEST mode, the shade function
and wind monitoring times are short-
ened. The functions can be controlled in
automatic mode.
End the test mode by using the slide
switch to move from automatic mode
to manual mode and back to automatic
mode. If the slide switch is not oper-
ated within 15 minutes, the test mode is
ended automatically.
Manual mode Automatic mode