Installation manual

52
Setting the limit positions for type PSF(+)
3. Deleting the limit positions
via the master transmitter
Press the programming button and
the STOP button simultaneously
until the drive clicks twice after 10
seconds.
If the curtain is situated between the
limit positions, both limit positions
are deleted in the procedure. If the
curtain is situated in one of the limit
positions, only this position will be
deleted.
1. Programming the extend-
ing limit position via the
programming unit
Travel the curtain to the extending
limit position. Then press the pro-
gramming button and the extending
button until the drive clicks once.
PSF(+) drives
2. Programming the retract-
ing limit position via the
master transmitter
Retracting limit position stop
Travel the curtain towards the
upper stop until the drive stops
automatically.
To retracting limit position
point
Travel the curtain to the desired
retracting position. Then press
the programming button and the
RETRACT button until the drive
clicks once.
1 x click
1 x click
2 x click