Installation manual

50
Type plate for PSF(+) drives
Type designation: e.g., R30/17C PSF+
R size of drive
(tube diameter)
P – 35 mm
R – 45 mm
L – 58 mm
30/17 rated torque/output speed
C pluggable connecting cable
P point to point programming
possible
S electronic limit switching
for sun protection
F radio receiver
+ higher closing torque
for cassette awnings
Operating mode (short-period
operation S2)
After 4 minutes of continuous operation,
the drive must be allowed to cool off.
Serial number: e.g., 08 49 20095
08 year 2008
49 calendar week
20095 consecutive number
Connecting PSF+ drives
Drives with electronic limit switching and inte-
grated radio receiver are connected directly
to the power supply. The brown wire and the
black wire are clasped together on the outer
conductor L1.
PSF(+) drives
Drive
Mains