Installation manual

43
Drives for sun protection
Information on the PS(+) drive
PS(+) drives with electronic limit switch-
ing detect and program the closing limit
position automatically if a permanent
stop exists.
If no stop exists, a limit switch point is
programmed.
PS drives
PS drives are used to operate screens,
awnings and conservatory shading.
PS+ drives
PS+ drives are used to operate cas-
sette awnings that require a higher clos-
ing torque. The cassette is then always
closed completely.
The limit positions can be set using the
programming unit or the switch on the
drive head.
Connect the wires in the connecting
cable of the drive to the wires of the same
colour in the programming unit.