Installation manual

39
Drives for sun protection
Information on the S(+) drive
S(+) drives with electronic limit switching
detect and program the closing limit po-
sition automatically if a permanent stop
exists.
S drives
S drives are used to operate screens,
awnings and conservatory shading.
S+ drives
S+ drives are used to operate cassette
awnings that require a higher clos-
ing torque. The cassette is then always
closed completely.
The limit positions can be set via the
programming unit.
Connect the wires in the connecting
cable of the drive to the wires of the same
colour in the programming unit.