Installation manual

37
Drives for sun protection
Switch off the retracting mechanism.
Using the flexible tool, turn the ad-
juster for the extending limit position
3-10 revolutions in the - direction
(depending on how many times the
fabric is wrapped around the tube
when the curtain is extended).
2. Setting the retracting limit
position
Travel the curtain in the extending
direction until the drive switches off
automatically via the limit switch for
the extending limit position.
Using the flexible tool, turn the ad-
juster for the extending limit posi-
tion in the + direction (clockwise),
until the desired extending position
is reached.