Installation manual

35
Drives for sun protection
Information on the M drive
Before installation, make sure that the
drive adapter safety catch has engaged
(is screwed on).
Mark the position of the drive adapter
on the tube and drill a 4 mm hole at this
point.
Secure the drive adapter against axial
displacement in the tube using a screw
or a rivet.
The arrow on the drive head indicates
the direction of rotation at
. The limit
position is set via the corresponding
adjuster using the flexible tool (item no.
4933 200 002 0).
Turning in the + direction increases the
range; turning in the - direction reduces
it.
The barrel may not be turned more than
38 revolutions in one direction.