Installation manual

29
Drives for roller shutters
Setting the intermediate positions for type PRF +
4. Programming the intermediate
position
Move the drive to the required inter-
mediate position and press the STOP
and DOWN buttons until the drive clicks
once.
To drive up to the intermediate position,
press the DOWN button twice in one sec-
ond.
5. Programming the ventilation
position
Move the drive to the required ventilation
position and press the STOP and UP but-
tons until the drive clicks once.
To drive up to the ventilation posi-
tion, press the UP button twice in one
second.
6. Deleting the intermediate po-
sition/ventilation position
Travel the drive to the position you wish
to delete and repeat the programming
procedure (press the STOP and DOWN
buttons or STOP and UP buttons) until
the drive clicks twice.
1 x click
2 x click 2 x click