Installation manual

23
Drives for roller shutters
Information on the PR+ drive
PR+ drives with electronic limit switch-
ing detect and program the limit pos-
itions automatically if stops exist. If
no stops exist, limit switch points are
programmed.
In order for the drive to detect the upper
limit position without problems, a de-
fined stop must be present (angled strip
or mechanical stop).
Installation with anti-lifting
devices
The anti-lifting devices must be secure-
ly engaged and be pressing the roller
shutters onto the window sill.
The limit positions can be set using the
programming unit or the switch on the
drive head.
Connect the wires in the connecting
cable of the drive to the wires of the same
colour in the programming unit.