Installation manual

20
RP(+) drives
1. Programming the upper limit
position
Connect the wires in the connecting
cables of the drive to the wires of the same
colour in the Becker programming unit.
To upper stop
Travel the roller shutters towards the
upper limit position until the drive au-
tomatically stops.
To upper point
Move the roller shutters to the
desired upper position and press the
programming button on the program-
ming unit until the drive clicks once.
Programming the limit positions with the programming
unit of type RP(+)
2. Programming the lower limit
position
To lower stop
Travel the roller shutters downwards
until the drive switches off automati-
cally due to the effect of the springs
(type PR) or being blocked by the
anti-lifting devices (type RP+).
Type RP Type RP+
To lower point
Travel the roller shutters to the
desired position and press the pro-
gramming button on the program-
ming unit until the drive clicks once.
2 x click
1 x click