Installation manual

11
Drives for roller shutters
Information on the PicoR+ drive
PicoR+ drives with electronic limit
switching detect and program the upper
limit position automatically.
In order for the drive to detect the
upper limit position without problems, a
defined stop must be present (angled
strip or mechanical stop).
The springs are attached to the mini
tube using tube clamps. This stops the
springs from dragging against the drive.
The limit positions can be set using any
operator control.
Limit positions are deleted using the pro-
gramming unit.
Connect the wires of the connecting
cable of the drive to the wires of the same
color in the programming unit.