User Guide

99
General Operation
General Operation
Switching on the unit
Press button.
Additional options for switching on / off: Via
ignition. In order to switch on via the ignition, the
unit must have been switched off previously via
the ignition. After switching off the ignition, the
unit can be prevented from switching off by
pressing the button within 3 seconds.
Note:
With the ignition switched off, the unit can also be
switched on via the button. The unit switches
off automatically after 1 hour.
Adjusting the volume
Turn the left rotary control . The volume
increases or decreases.
The volume change is graphically shown on the
display.
Activating the tone control menu
Settings for bass, treble, balance and fader are
stored separately for the audio sources: radio, CD,
MP3 and CDC/AUX mode.
The loudness settings affect all the sources.
The Tone menu can be called up by pressing one
of the source buttons for more than 2 seconds.
• Source key for the currently set wavebands
(FM or AM)
• Source key for the currently active media
sources (CD, MP3, CDC/AUX)
The following functions can be called up:
Bas
(Bass), Trb (Treble), Fad (Fader), Bal (Balance),
Flt (Linear adjustment), Sub (Subwoofer) and
Ldn (Loudness).
The source is always shown at the left in the
display (i.e. FM in the illustration).
Adjusting the bass
Press the source key for more than 2 seconds. Press
multifunction button .
Set the desired bass level using the right rotary
control .
Adjusting the treble
Press the source key for more than 2 seconds. Press
multifunction button .
Set the desired treble level using the right rotary
control .