User Guide

172
User settings
Display setting (Lcd)
The display setting allows you to select from three
different display versions.
• Negative Display Setting (
negative)
• Positive Display Setting (
positive)
• Automatic Display Setting (
Automatic) - this
means that the display setting will be positive or
negative depending upon the vehicle illumina-
tion.
To set, call up the General Settings menu. By
pressing multifunction button , select
nega-
tive
, positive or automatic.
The setting is stored automatically.
LED setting (Led)
With this function, the LED function (blinking
when the unit is switched off) can be switched on
and off.
Call up the General Settings menu. By pressing
multifunction button , select either
blinking (LED on) or on (LED off).
The setting is stored automatically.
Display brightness setting (Lum)
With this function, the display brightness can be
set to the preferred value.
To set, call up the General Settings menu. Press
multifunction button . With the right rotary
control , select between
10 and -10.
The setting is stored automatically.
The settings are from:
•
0 - no change in display brightness
•
10 - highest possible display brightness
•
-10 - lowest possible display brightness
Setting reception optimisation (M/S)
Two different reception optimisation settings can
be selected in order to suppress reception-depend-
ent interference and reflections.
To set, call up the General Settings menu.
By pressing multifunction button , select
Stereo, Mono or Auto.
•
Auto: Setting for normal operation - i.e. the unit
switches from stereo to mono reception and
back, depending on the reception conditions
(for nearly all reception areas, this is the optimal
setting).
•
Stereo: Setting for exceptional reception con-
ditions - i.e. the unit is constantly set to stereo.
•
Mono: Setting for reception conditions with
constant reflection - i.e. the unit is constantly set
to mono.
The setting is effective immediately and is also re-
tained after power is turned off.