User Guide

171
User settings
User menu
Call up / quit User Settings menu
After opening the User Settings menu, the follow-
ing Basic Settings can be set in three menu levels
according to your personal preference.
First level:
•
Gal - Speed dependent volume control (GAL)
•
Col - Setting for display colour
•
Lcd - Display setting
•
Led - LED setting
•
Lum - Setting for display brightness
•
M/S - Setting for reception optimisation
Second level:
•
Aux - Setting for the AUX input
•
BeV - Setting for signal tone volume
•
Inc - Setting for turning direction of rotary
control
•
Vol - Setting for volume display
•
Mic - Hands-free microphone setting
Third level:
•
HsV - Volume setting for optional handset
•
Lim - Limits the maximum audio volume level
•
Lvl - Adjusts the digital audio source (CD etc.)
volume
•
Rst - Call up reset function
To call up the User Settings menu, press the
button for more than 2 seconds.
Press multifunction button to reach the
second and third level of the User Settings menu.
To exit the User Settings menu, press one of the
buttons , , or .
Setting the GAL (Gal)
The GAL is a control circuit within the car radio
which adapts the radio volume to the vehicle
speed. This functions as a compensation for
driving noises resulting from higher speeds.
Call up the General Settings menu. Press multi-
function button . With the right rotary
control select either
0 or +15.
With the GAL setting, the amount of volume con-
trol can be specified according to vehicle speed.
The setting is stored automatically.
The settings are from:
•
0 - no volume increase
•
+1 - slight volume increase (low noise levels in
interior - low-noise vehicle).
•
+15 - high volume increase (high interior noise
levels - noisy vehicle).
Display colour setting (Col)
This setting is used to choose between two illumi-
nation colours (not available for all models).
To set, call up the General Settings menu. By
pressing multifunction button , select either
red or yellow.
The setting is stored automatically.