User Guide

163
Radio mode
Selecting / deleting direct program-
ming
Activate the TP menu.
Selecting: Press multifunction button .
Using the right rotary control , select the desired
TP transmitter and press the control to confirm.
After a short delay and without actuation, the se-
lected transmitter is accepted.
Deleting:Press multifunction button .
Select
Autoselect with the right rotary
control and press the control to confirm. After a
short delay and without actuation, direct program-
ming is deleted.
Quit the TP menu.
Switching mute function on or off
After selection of a TP or EON transmitter, the
mute function can be activated by pressing the
button briefly.
Thereafter, only traffic announcements and navi-
gation announcements will be passed through. The
mute function is cancelled by pressing the
button again.
Interrupting TP announcements
Briefly press the button during the TP an-
nouncement.
The announcement currently being broadcast will
be interrupted and the system will automatically
return to the previously selected mode.
TP announcement volume
Activate the TP menu. Press multifunction
button .
With the right rotary control , four different set-
tings (
0 - +3) can be selected. This means that the
volume can be raised to a fixed value according to
the setting.
• Setting
0 - no increase
• Setting
+1 - slight increase
• Setting
+3 - strong increase
Display for TMC stations
If a radio station broadcasts TMC information in
addition to radio programming, this is indicated by
the abbreviation
TMC in the display. TMC informa-
tion is received and analysed by the navigation
system. The reception of traffic announcements is
free of charge.