User Guide

160
Radio mode
Turning PTY display on or off
Select radio menu mode.
With multifunction button , select either
PTY
(PTY Display On) or Frequency (PTY Display
Off).
Calling up/ Storing FM stations
In the Radio Menu Mode, select level Stations
RDS
or Stations fix using multifunction
button .
•
Stations RDS (see also page 176)
•
Stations fix (see also page 176)
Storing: 12 frequencies or programmes can be
stored per waveband.
To store the desired station or program, press the
multifunction buttons - or -
until you hear a signal tone.
To reach memory slots 7 – 12, press multifunction
button .
Request: Press multifunction button -
or - . The stored station is requested.
Calling up/storing MW, LW, SW sta-
tions
Store: Up to 12 stations can be stored under the
station buttons. Search for the desired station and
press the desired multifunction button until you
hear a signal tone.
To reach memory slots 7 – 12, press multifunction
button .
Request: press multifunction button -
or - . The stored transmitter is request-
ed.
Manual FM tuning
In the Radio Menu Mode, select the level Sta-
tions fix
with multifunction button .
Press multifunction button twice.
Next, turn the right rotary control .
Tuning will take place in increments of 100 kHz.
The display will show that manual tuning iscur-
rently active with
MAN. If the right rotary
control is not turned after a short time,
MAN will
disappear from the display and manual tuning is
turned off.
Manual tuning MW, LW, SW
Press the button on the desired waveband.
Press multifunction button 2 times.
Then turn the right rotary control .
Tuning will be in increments of 9kHz (MW), 3kHz
(LW) or 5kHz (SW).
The display will show that manual tuning iscur-
rently active with
MAN. If the right rotary
control is not turned after a short time,
MAN will
disappear from the display and manual tuning is
turned off.