User Guide

150
Internet (WAP) Functions
The configurable keys will be displayed for about
5 seconds.
By pressing one of the keys, the WAP page for
which the key was configured will be called up.
Call up Configuration
To call up one of the pages configured in the Inter-
net, press the key in the Communications
menu.
With the right rotary control select
@WAP c on-
figuration
and press the control to confirm.
Using the right rotary control select
Load @
favourites
and press to confirm.
By turning the right rotary control select either
Yes or No (the inverted entry is active) and press
to confirm.
If
Yes is selected, a connection will be made to the
Beckerclub Homepage and the configuration for
the freely configurable buttons will be saved.
Settings
In the Browser Settings menu, browser-specific
settings can be made.
In order to use this unit to access the Internet, you
must make a number of settings. OnlinePro will
then use these settings to log onto the Internet.
These special settings (profiles) differ for each net-
work provider.
OnlinePro is supplied with the profiles for the four
largest network providers in Germany already set.
Please see ”Activating access profile” on page 152
for a description of how to activate them. Please
see ”Loading Access Profiles” on page 153 for a
description of how to load settings for other pro-
viders and other countries. You can also obtain
these settings from network providers in your own
country.
Note:
Not all of the functions described may be support-
ed by the network provider.
To call up the Browser Settings menu, press
the key in the Communications menu.
With the right rotary control select
Browser
and press the control to confirm.
Select
Profile,
URL settings or
Browser start settings
by turning the right rotary control . Selection is
confirmed by pressing the control.
Profiles
Select Profile in the browser settings using the
right rotary control and press to confirm.
The profile settings are called up.
You can now select either
Create new pro-
file?
or the existing profiles by turning the right
rotary control.