User Guide

142
SMS messages
SMS Messaging
Text messages (SMS) may be received, answered
and written. To ensure proper function, the SMS
central network number you received from the pro-
vider must be entered at ”Settings” on page 145.
In order to receive or send messages, telephone op-
eration must be activated.
New Message display
If a new message is received, this is indicated by a
blinking
SMS in the display. The New Message dis-
play works in other operation modes as well (radio,
navigation, etc.).
If SMS is displayed without blinking, the memory
contains only previously read SMS messages.
Reading messages
Call up the Communications menu by pressing
the button.
Press multifunction button .
By turning the right rotary control , select
Read
all SMS
and press to confirm.
A list of received SMS messages will be displayed.
Messages that have not yet been read are identified
by the symbol .
Messages that have already been read are identi-
fied by the symbol .
Note:
If no messages are saved, the display will show
<No SMS in memory>. After a short time, the
Communication menu appears again.
By turning the right rotary control , select the
desired SMS message. By pressing, the text of the
SMS message is displayed.
The entire message can be scrolled through by
turning the right rotary control .
By pressing the right rotary control , the SMS
message will be read aloud.
Note:
SMS messages are only read out in German.
At the end of the message, the date and time sent,
the telephone number and name of the sender (if
available) are displayed.
By continuing to turn the right rotary control
after the sender information has been displayed, a
menu for further processing of the message will be
displayed.