User Guide

132
Telephone mode
• Upper / lower case letters
With multifunction button , you can
choose between upper and lower case letters.
• Special characters / Numbers
With multifunction button , you can
choose between special characters and numbers.
• Moving the cursor
Press multifunction button .
By repeatedly pressing the multifunction but-
ton, the cursor can be moved to the left.
If multifunction button is held for more
than 2 seconds, the display will move above the
multifunction button, and the cursor can be
moved to the right by repeatedly pressing the
multifunction button.
By pressing and holding the right rotary control ,
the name entered is accepted.
The new entry will be stored in the telephone book.
Editing:
After selecting
Modify, the previous telephone
number of the entry to be edited must first be
changed or confirmed.
Afterward, the previous name of the entry will be
shown to be changed or confirmed.
Note:
The menus for entering the telephone number or
name are operated as described above in ”Adding
an Entry”.
Löschen:
After selecting
Delete, the following menu is
shown for safety reasons:
By turning the right rotary control , select either
Yes or No (the inverted entry is active) and press
the control to confirm.
Selecting
Yes deletes the entry from the telephone
book.
Selecting
No will return to the telephone book
without change.
Call list
The unit stores numbers and names (if known from
the telephone book) of phone numbers dialled as
well as answered and unanswered calls, in a list.
Numbers and names can be only stored if the
number of the caller was transmitted.
Note:
The call list can only be selected when numbers or
names have been saved in the list. If nothing is
stored in the list, multifunction button will
not be displayed.
Open the Communications menu to call up the call
list.
Press multifunction button .
The displayed list can be scrolled through by turn-
ing the right rotary control .
The type of entry is indicated by various symbols
in front of the corresponding entry.
• Symbol stands for an answered call.
• Symbol stands for an unanswered or reject-
ed call.
• Symbol stands for dialled numbers.