User Guide

131
Telephone mode
Dialling a telephone book entry
Call up telephone book.
There are two possibilities for dialling an entry:
• By turning the right rotary control .
• By repeatedly pushing one of the multifunction
buttons - .
If an entry to be dialled begins with the letter
”F” for example, multifunction button
must be pressed 3 times.
In the telephone book, the first entry beginning
with the letter ”F” is displayed. By turning the
right rotary control , the desired name can be
selected.
After pressing multifunction button , special
characters can also be selected via the multifunc-
tion buttons.
To dial the selected telephone book entry, briefly
press the right rotary control .
Connection will be made with the desired person.
Editing / Adding / Deleting telephone
book entries
Call up the telephone book.
Select the entry to be edited or deleted as described
above or, to add an entry, select any entry.
By pressing and holding the right rotary control ,
the Telephone Book Entry menu will be displayed.
By turning the right rotary control , you can
choose between
New,
Modify and
Delete.
Confirm your selection by pressing the right rotary
control .
Adding an entry:
After selecting
New, the telephone number of the
new entry must be entered first.
Press the multifunction buttons through
, to enter the desired number with area code
(and international dialling prefix if necessary).
Briefly press the right rotary control to apply
the number entered.
Next, the name for the new entry must be entered.
You may now enter a name. There are two possi-
bilities:
• Select the letter or character with the right rotary
control and press the control to confirm. The
selected letter is displayed inversely.
• Select characters or letters by repeatedly push-
ing the multifunction button below the desired
character; i.e. to enter a C, the multifunction
button below ABC must be pressed 3 times.
Further entry and formatting possibilities: