User Guide

126
Using Navigation
• Turning route-relevant traffic announcements
on or off:
Activate
Traffic announcement update,
Warning announcement and Only on
route
as described above.
If all entries are active, only the warning an-
nouncements relevant for the route will be is-
sued.
Exit the traffic announcements Set-up menu by
pressing the right rotary control for more than
2 seconds.
Settings
Set and confirm Settings in the System Settings
menu.
The entries
Announcement ETA and
Animation in menus
are available for selection
• Turning announcement of Arrival Time on or
off:
Set
Announcement ETA.
By pressing the right rotary control , you can
choose between Arrival Time On ( ) and
Off ( ). Confirm your selection by pressing
and holding the right rotary control .
• Turning Menu Animation on or off:
Set
Animation in menus.
By pressing the right rotary control , you can
choose between Menu Animation On ( ) and
Off ( ). Confirm your selection by pressing
and holding the right rotary control .
Exit the Setting menu by pressing the right rotary
control for more than 2 seconds.
Selecting the units
Set and confirm Measuring unit in the System
Settings menu.
Select the preferred unit of measurement. Pressing
the right rotary control then selects either
On ( ) or Off ( ).
Exit the Measurement unit setting menu by press-
ing the right rotary control for more than
2 seconds.
Note:
Metric stands for calculation in metres. Imperi-
al
stands for calculation in yards.