User Guide

108
Using Navigation
shown in parentheses.
If the street number entered is available, the pro-
gramme returns to the Destination Entry menu.
If the street number entered is not available, the
street number range list is displayed. A street
number range can now be selected.
Select
Start... to start route calculation.
Note:
Due to system configurations, route guidance will
only be given up to the range of the entered street
number.
Selecting intersection for destination
road
This function can only be selected if this informa-
tion is contained in the navigation CD.
Select
Crossing in the Destination Entry
menu with the right rotary control, and press the
control to confirm.
Select the intersection for the destination road by
turning the right rotary control and press the
control to confirm.
The programme will return to the Destination En-
try menu.
If you select
Start... the route calculation is
started.
Starting the route calculation
Once the destination is completely entered in the
Destination Entry menu, select
Start with the
right rotary control.
Route calculation begins, using the route option
settings (fastest, shortest or dynamic route).
Route options
With the route options, the calculation of the route
can be influenced.
Select
Route settings in the Destination Entry
menu using the right rotary control and press to
confirm.
Select from
Fast route,
Dyn. route RDS,
Dyn. route TDS,
Short route,
Avoid Ferry,
Avoid Motorway,
Avoid Toll,
Avoid Tunnel
Private route
and
Bussiness route
by turning, and change the settings by pressing the
right rotary control to select On ( ) or Off
().
Press the control for more than 2 seconds to accept
all settings and exit the menu. The route calcula-
tion is started.
Only one of the settings,
Fast route, Dyn.
route RDS
, Dyn. route TDS or Short
route
, can be activated at once. The restriction